LUME PLA+ is a 1.75 ±0.02 mm filament for FDM/FFF 3D printers, supplied as 1,000 g net on a cardboard spool. Recommended nozzle temperatures of 220–240°C and build plate temperatures of 55–65°C provide a starting point for calibration. Vacuum packaging includes desiccant.
LUME PLA+ is a polylactic-acid-based filament for FDM/FFF 3D printing. It is intended for prototypes, visual models, housings, decorative objects, educational projects and short production runs. Its 1.75 mm diameter suits printers with a matching feed system, while the specified temperature ranges provide a starting point for creating a printing profile.
The ±0.02 mm diameter tolerance limits variations that can affect how much filament passes through the nozzle. It supports consistent everyday feeding, but is not a guarantee of finished-part accuracy. Results also depend on printer mechanics, extrusion calibration, temperature, cooling, model geometry and slicer settings.
The manufacturer lists prototypes, visual components, housings, functional models and short runs as key uses. Applications involving sustained high temperatures, weather exposure, aggressive chemicals or regulatory requirements need prior validation.
The safety data sheet describes a polylactic-acid-based polymer with colourants. The technical data sheet identifies renewable raw materials and degradation under specific conditions. This does not establish suitability for home composting; a specific compostability standard or certification is not stated.
Start within 220–240°C at the nozzle and 55–65°C at the build plate. Calibrate for your printer: differences in sensors, hotend construction, nozzle, feeding and cooling can shift the optimum within that range. The manufacturer recommends 90–100% fan speed. For the first layers, also follow your build surface manufacturer’s guidance.
No verified maximum printing speed is specified for the series. Choose speed according to hotend capacity, volumetric flow, geometry and the required quality. Record temperature, flow, retraction, cooling and first-layer settings to make the process repeatable.
LUME PLA+ requires an FDM/FFF printer with a 1.75 mm feed system, a nozzle capable of 220–240°C and a heated build plate operating at 55–65°C. The technical data sheet does not require an enclosure or hardened nozzle, so open desktop systems can be used when their own operating requirements are met.
The cardboard spool measures 196 mm outside diameter, 52 mm centre hole and 68 mm width. The manufacturer’s catalogue specifies dimensional compatibility with Bambu Lab AMS and AMS Lite, Creality CFS, Anycubic ACE and Prusa systems. Actual feeding also depends on the cardboard edges, support mechanism and clearances. Follow the feeding-system manufacturer’s guidance and measure before selecting an adapter ring.
The filament has no proprietary file format or separate CAD requirement. STL, 3MF and OBJ files are processed by your slicer and printer. If a verified material profile is unavailable, use a generic PLA profile and calibrate it within the technical data sheet’s ranges.
Check the physical dimensions of any holder, feeder or dry box. A suitable filament dryer must maintain 55°C without deforming the cardboard spool.
After opening, keep the filament in a dry, sealed environment. When needed, the manufacturer recommends drying for at least 4 hours at 55°C in a dedicated filament dryer. Inconsistent feeding, popping at the nozzle, bubbles, rough surfaces or increased stringing may indicate moisture, but can have other causes. Check temperature and retraction after drying.
For difficult build surfaces, first clean according to the surface manufacturer’s instructions and check bed levelling. Work within 55–65°C and adjust first-layer contact without excessively reducing nozzle clearance. There is no single adhesive suitable for every build surface.
Keep the cardboard spool dry and its edges undamaged. In roller-based feeders, check for smooth movement and shedding particles. Rewinding without controlled tension can loosen the winding and cause crossed filament.
The safety data sheet does not classify LUME PLA+ as a hazardous mixture under CLP. Nevertheless, ventilate the work area and avoid contact with the heated nozzle or molten polymer. If molten material contacts skin, follow the SDS instructions and seek medical attention. Do not dispose of waste filament into drains or surface water.
| Parameter | Value | Practical meaning |
|---|---|---|
| Product | LUME PLA+ | Polylactic-acid-based filament with colourants |
| Technology | FDM/FFF | Thermal filament extrusion systems |
| Diameter | 1.75 ±0.02 mm | Check feed-system compatibility |
| Net filament quantity | 1,000 g | Excludes the spool |
| Nozzle temperature | 220–240°C | Calibrate within this range |
| Build plate temperature | 55–65°C | Adjust for the surface and geometry |
| Cooling | 90–100% | Technical data sheet recommendation |
| Filament and ambient temperature | 10–30°C | Specified operating range |
| Enclosure | Not mandatory | Open FDM/FFF systems can be used in controlled conditions |
| Hardened nozzle | Not mandatory | Applies to standard LUME PLA+ |
| Spool material | Cardboard | Keep dry and check the edges |
| Spool outside diameter | 196 mm | Check holder or feeder clearance |
| Centre hole diameter | 52 mm | Check holder-shaft compatibility |
| Spool width | 68 mm | Check side clearance |
| Packaging | Vacuum packed with desiccant | Keep sealed until use |
| Drying | At least 4 hours at 55°C | When needed after opening |
| Storage | Ideally up to 30°C; do not exceed 50°C | Dry, clean, ventilated location away from direct UV light |
| CLP classification | Not classified | Ventilation and protection from hot parts are still required |
| REACH | Declared SVHC content up to 0.1% | Manufacturer’s declaration |
|
