Black

Showing 1–12 of 28 results

Fillamentum CPE HG100 Vertigo Grey

33.15 

Fillamentum – CPE HG100 Vertigo Grey
Fillamentum CPE (co-polyester) is a high-technical material for the FFF (also known as FDM) 3D printing technology.
Engineered for quality and easy printing with features that will dwarf all PET based materials.
Made from modified PETG material. Additional monomer improves all the properties when compared with PETG filaments.

Fillamentum – Vinyl 303 Black

40.80 

Fillamentum – Vinyl 303 Black

(polyvinylchloride) is a high-technical material for the FFF (also known as FDM) 3D printing technology.

Vinyl 303 is commodity plastic ideal for prototyping:

  • Flame retardant resistance
  • Excellent chemical resistance – resistant to oils, salts, solutions, water
  • Functionality, toughness, rigidity
  • Great hardness and mechanical properties
  • High impact strength
  • Low moisture adsorption
  • Safe for use in electrical and electronic equipment
  • Recyclable, styrene free

PET black

29.58 

PET black

  • PET (also known as polyethylene  terephthalate) in its original state is a colourless and crystal clear material.
  • PET is a very hard and very lightweight materials which is highly resistant to impact. Spool with fibre diameter of 1.75 mm
  • Weight: 750 g

Flexible

39.78 

Flexible

  • Would you like to print an object with better flexibility?
  • The Flexible material is the right choice for you!
  • In order to print this flexible material with good results you must reduce the print speed to 10-40 mm/sec;
  • Give it a try and see how easy it is to print with Flexible!
  • It is supplied in two colours: white and black
  • 1.75 mm – Weight: 0.50 kg

Fillamentum – Flexfill 98A Traffic Black

28.05 

Fillamentum – Flexfill 98A Traffic Black

  • Do you want your 3D models to stand out with their elasticity and flexibility?
  • It is time to try Flexfill;
  • Flexfill is an oil-resistant material with unique mechanical properties and excellent adhesion between the layers.
  • If you have a printer with two printheads, you can use Flexfill to add another layer which will make the surface of the objects soft to the touch

Pure FT

49.98 

Pure FT

  • Flexible material with a 93 score on the Shore A scale
  • Enriched with antimicrobial material of a new generation with 99.9% effectiveness
  • Laboratory tested in compliance with the international standards
  • Suitable for production of orthopaedic insoles
  • Colour: orange
  • Extruder temperature: 225 -5+10° C
  • Bed temperature: 55° C
  • Print speed: 35-50 mm/1°
  • Spool: 500 g

Elasto A

49.98 

Elasto A

  • Elasto А is a flexible elastomer material, with hardness of 92 according to the Shore А Scale
  • Reliable in time and resilient to aggressive skin fats
  • Excellent elasticity and high abrasion resistance
  • Suitable for elastic connectors
  • Colour: Orange
  • Extruder temperature: 220-0+10° C
  • Bed temperature: 50° C
  • Print speed: 30-50 mm/1°
  • Spool: 500 g

Verum T  

71.40 

Verum T      

3D filament based on a polyester matrix

  • With Verum T you can print hard objects with high resistance
  • The objects may be sterilised in an autoclave at 125°С
  • Suitable for rigid immobilising braces
  • Colour: transparent
  • Extruder temperature: 265-0+10° C
  • Bed temperature: 100-0+10° C
  • Print speed: 35-45 mm/1°
  • Spool: 800 g

STRUCTURA MA

99.96 

STRUCTURA MA

  • Material based on polyamide and carbon fibres
  • Lightweight material with excellent mechanical characteristics
  • The carbon fibres make it flexible and suitable for the production of small details
  • Upper and lower limb prosthetics and exoskeleton elements
  • Colour: black
  • Extruder temperature: 235 -5+10° C
  • Bed temperature: 60-70° C
  • Print speed: 35-45 mm/1°
  • Spool: 1 kg

FORTIS LL

59.67 

FORTIS LL

  • Fortis LL is made on a polyolefin matrix and combines elasticity, good elastic memory,  wear and tear resistance.
  • Exceptionally lightweight material
  • For corrective braces or flexible splinting of the soft tissues of limbs
  • Colour: white
  • Extruder temperature: 250-0+15° C
  • Bed temperature: 90° C
  • Print speed: 40-60 mm/1°
  • Spool: 750 g

Fillamentum – CPE HG100 Black Soul

33.15 

Fillamentum – CPE HG100 Black Soul

  • CPE (co-polyester) is a high-tech material for the  FDM printing technology!
  • Designed for high quality easy printing with functions exceeding those of the PET-based materials used so far.
  • Supplied in a spool, with filament size of 1.75 mm

Fillamentum – Nylon CF15

52.02 

Fillamentum – Nylon CF15

The main advantages of this material are its strength and high thermal resistance reinforced with carbon fibres

  • High accuracy of consumption +/- 0.1 mm
  • Fibre diameter: 1.75 or 2.85
  • Operating temperature: 235 – 260 °C
  • Weight: 600 g material (+ 250 g spool)
  • Note: Nylon CF15 has abrasive properties and it is recommended that it should be printed with a hardened or steel nozzle.