Showing all 9 results

Timberfill “Light Wood Tone”

72.00 лв. excl. VAT

Timberfill “Light Wood Tone” / Woodfill

  • Fillamentum Timberfill is a material for: the FFF 3D printing technology (also known as FDM)
  • Diameter tolerance: +/- 0.1 mm
  • Operating temperature: 170 – 185 ° C
  • Minimum nozzle diameter: 0.4 mm
  • To achieve best printing quality, we recommend: nozzle with diameter 0.5 mm
  • Weight: 750 g fibre (+ 250 g spool)

Timberfill “Rosewood”

72.00 лв. excl. VAT

Timberfill “Rosewood” / Woodfill 

  • Fillamentum Timberfill is a material for: the FFF 3D printing technology (also known as FDM)
  • Diameter tolerance: +/- 0.1 mm
  • Operating temperature: 170 – 185°C
  • Minimum nozzle diameter: 0.4 mm
  • To achieve best printing quality, we recommend: nozzle with diameter 0.5 mm
  • Weight: 750 g fibre (+ 250 g spool)

WOODFILL

76.00 лв. excl. VAT

WOODFILL

  • 3D printing with a magnificent wood effect!
  • If you are looking for: something special, Woodfill is just the right material for you!
  • Composed of 70% PLA and 30% recycled wood fibers
  • Spool: 1.75 mm and weight: 0.75 KG

CAEMENTUM

57.00 лв. excl. VAT

CAEMENTUM

Caementum – for concrete foundations!

  • Designed specifically: for architecture, design, and archaeology
  • Printed objects resemble concrete;
  • Polish with sandpaper and water;
  • Extruder temperature: 230° +/-10° C
  • Bed temperature: 100° +/-10° C
  • Print speed: 60-70 mm/sec
  • Spool: 0.75 kg

HERITAGE BRICK

57.00 лв. excl. VAT

HERITAGE BRICK

Heritage Brick – Print them on – Build it up

  • Designed specifically for: architecture, design, and archaeology
  • Polish with sandpaper and water
  • Extruder temperature: 230° +/-10° C
  • Bed temperature: 100° +/-10° C
  • Print speed: 60-70 mm/sec
  • Spool: 0.75 kg

SANDY

57.00 лв. excl. VAT

SANDY

As smooth as sand – as durable as the pyramids

  • Designed specifically for: architecture, design, and archaeology
  • Printed objects resemble sand
  • Polish with sandpaper and water
  • Extruder temperature: 230° +/-10° C
  • Bed temperature: 100° +/-10° C
  • Print speed: 60-70 mm/sec
  • Spool: 0.75 kg

CLAY

57.00 лв. excl. VAT

CLAY

Clay – Warm and earthy

  • Contains stone powder;
  • Designed specifically for: architecture, design, and archaeology
  • Polish with sandpaper and water
  • Extruder temperature: 230° +/-10° C
  • Bed temperature: 100° +/-10° C
  • Print speed: 60-70 mm/sec
  • Spool: 0.75 kg

MONUMENTAL

57.00 лв. excl. VAT

MONUMENTAL

  • Designed specifically for: architecture, design, and archaeology
  • Contains marble powder
  • Printed objects have a marble effect
  • Polish with sandpaper and water
  • Extruder temperature: 230° +/-10° C
  • Bed temperature: 100° +/-10° C
  • Print speed: 60-70 mm/sec
  • Spool: 0.75 kg

MONUMENTAL EVOLUTION

69.00 лв. excl. VAT

MONUMENTAL EVOLUTION

  • Designed specifically for: architecture, design, and archaeology
  • Contains marble powder
  • Printed objects have a marble effect
  • Suitable for outdoor use
  • High hardness polymer, UV stable, with less distortion
  • Printing does not require support
  • Extruder temperature: 240° +/-10°C
  • Bed temperature: 100° +/-10° C
  • Print speed: 60-70 mm/sec
  • Spool: 0.5 kg