Orthopedics Filaments

Healthfil ORTHOPEDICS are filaments developed using new technology specifically for the orthopedic sector.
• Personalized orthopedic prostheses, splints and accessories made individually for each patient.
• Certified according to European standards and requirements for hardness, flexibility, durability and after-treatment.
• Meet all the requirements of the UNI EN 10993-5 standard for 100% harmless skin contact!

Showing all 6 results

pure-ft 3 — Pure FT
49.98 €

**Pure FT**

**Flexible material with a 93 score on the Shore A scale**

**Enriched with antimicrobial material of a new generation with 99.9% effectiveness**

**Laboratory tested in compliance with the international standards**

**Suitable for production of orthopaedic insoles**

**Colour:** orange

**Extruder temperature:** 225 -5+10° C

**Bed temperature:** 55° C

**Print speed:** 35-50 mm/1°

**Spool:** 500 g

fortis-ll 3 — Pure FT
49.98 €

**Pure FT**

**Flexible material with a 93 score on the Shore A scale**

**Enriched with antimicrobial material of a new generation with 99.9% effectiveness**

**Laboratory tested in compliance with the international standards**

**Suitable for production of orthopaedic insoles**

**Colour:** orange

**Extruder temperature:** 225 -5+10° C

**Bed temperature:** 55° C

**Print speed:** 35-50 mm/1°

**Spool:** 500 g

elasto-a 1 — Elasto A
49.98 €

**Elasto A**

**Elasto А is a flexible elastomer material, with hardness of 92 according to the Shore А Scale**

**Reliable in time and resilient to aggressive skin fats**

**Excellent elasticity and high abrasion resistance**

**Suitable for elastic connectors**

**Colour:** Orange

**Extruder temperature:** 220-0+10° C

**Bed temperature: 50° C**

**Print speed:** 30-50 mm/1°

**Spool:** 500 g

verum-t — Verum T
71.40 €

**Verum T**

**3D filament based on a polyester matrix**

**With Verum T you can print hard objects with high resistance**

**The objects may be sterilised in an autoclave at 125°С**

**Suitable for rigid immobilising braces**

**Colour: transparent**

**Extruder temperature:** 265-0+10° C

**Bed temperature:** 100-0+10° C

**Print speed**: 35-45 mm/1°

**Spool:** 800 g

structura-ma — STRUCTURA MA
99.96 €

**STRUCTURA MA**

**Material based on polyamide and carbon fibres**

**Lightweight material with excellent mechanical characteristics**

**The carbon fibres make it flexible and suitable for the production of small details**

**Upper and lower limb prosthetics and exoskeleton elements**

**Colour:** black

**Extruder temperature:** 235 -5+10° C

**Bed temperature:** 60-70° C

**Print speed**: 35-45 mm/1°

**Spool:** 1 kg

fortis — FORTIS LL
59.67 €

**FORTIS LL**

**Fortis LL is made on a polyolefin matrix and combines elasticity, good elastic memory, wear and tear resistance.**

**Exceptionally lightweight material**

**For corrective braces or flexible splinting of the soft tissues of limbs**

**Colour:** white

**Extruder temperature:** 250-0+15° C

**Bed temperature:** 90° C

**Print speed:** 40-60 mm/1°

**Spool:** 750 g

fortis-ll — FORTIS LL
59.67 €

**FORTIS LL**

**Fortis LL is made on a polyolefin matrix and combines elasticity, good elastic memory, wear and tear resistance.**

**Exceptionally lightweight material**

**For corrective braces or flexible splinting of the soft tissues of limbs**

**Colour:** white

**Extruder temperature:** 250-0+15° C

**Bed temperature:** 90° C

**Print speed:** 40-60 mm/1°

**Spool:** 750 g

nylon — Fillamentum – Nylon AF80
64.77 €

Good interlayer adhesion
Smooth surface
Tribological properties
Higher tensile strength
Heat resistance
Low density
Impact resistance
Environmentally friendly

Fillamentum – Nylon AF80
64.77 €

Good interlayer adhesion
Smooth surface
Tribological properties
Higher tensile strength
Heat resistance
Low density
Impact resistance
Environmentally friendly

Call Now Button

Orthopedics Filaments

Pure FT

Elasto A

Verum T

STRUCTURA MA

FORTIS LL

Fillamentum – Nylon AF80