ABS Extrafill “Cobalt Blue”

40.00 лв. excl. VAT

ABS Extrafill “Cobalt Blue”

ABS is the perfect material for the production of prototypes and one of the most universal materials used in 3D printing;

“Fillamentum” guarantees material consumption with accuracy of +/- 0.05 mm

Filament diameter 1.75 mm / 2.85 mm

Operational temperature: 220 – 240°C

Weight: 750 g material (+ 250 g spool)

ABS Extrafill “Concrete Grey”

40.00 лв. excl. VAT

ABS Extrafill “Concrete Grey”

ABS is the perfect material for the production of prototypes and one of the most universal materials used in 3D printing;

“Fillamentum” guarantees material consumption with accuracy of +/- 0.05 mm

Filament diameter 1.75 mm / 2.85 mm

Operational temperature: 220 – 240°C

Weight: 750 g material (+ 250 g spool)

ABS Extrafill “Green Blue”

40.00 лв. excl. VAT

ABS Extrafill “Green Blue”

ABS is the perfect material for the production of prototypes and one of the most universal materials used in 3D printing;

“Fillamentum” guarantees material consumption with accuracy of +/- 0.05 mm

Filament diameter 1.75 mm / 2.85 mm

Operational temperature: 220 – 240°C

Weight: 750 g material (+ 250 g spool)

ABS Extrafill “Luminous Orange”

40.00 лв. excl. VAT

ABS Extrafill “Luminous Orange”

ABS is the perfect material for the production of prototypes and one of the most universal materials used in 3D printing;

“Fillamentum” guarantees material consumption with accuracy of +/- 0.05 mm

Filament diameter 1.75 mm / 2.85 mm

Operational temperature: 220 – 240°C

Weight: 750 g material (+ 250 g spool)

ABS Extrafill “Metallic Grey”

40.00 лв. excl. VAT

ABS Extrafill “Metallic Grey”

ABS is the perfect material for the production of prototypes and one of the most universal materials used in 3D printing;

“Fillamentum” guarantees material consumption with accuracy of +/- 0.05 mm

Filament diameter 1.75 mm / 2.85 mm

Operational temperature: 220 – 240°C

Weight: 750 g material (+ 250 g spool)

ABS Extrafill “Signal Brown”

40.00 лв. excl. VAT

ABS Extrafill “Signal Brown”

ABS is the perfect material for the production of prototypes and one of the most universal materials used in 3D printing;

“Fillamentum” guarantees material consumption with accuracy of +/- 0.05 mm

Filament diameter 1.75 mm / 2.85 mm

Operational temperature: 220 – 240°C

Weight: 750 g material (+ 250 g spool)

ABS Extrafill “Signal Red”

40.00 лв. excl. VAT

ABS Extrafill “Signal Red”

ABS is the perfect material for the production of prototypes and one of the most universal materials used in 3D printing;

“Fillamentum” guarantees material consumption with accuracy of +/- 0.05 mm

Filament diameter 1.75 mm / 2.85 mm

Operational temperature: 220 – 240°C

Weight: 750 g material (+ 250 g spool)

ABS Extrafill “Signal Yellow”

40.00 лв. excl. VAT

ABS Extrafill “Signal Yellow”

ABS is the perfect material for the production of prototypes and one of the most universal materials used in 3D printing;

“Fillamentum” guarantees material consumption with accuracy of +/- 0.05 mm

Filament diameter 1.75 mm / 2.85 mm

Operational temperature: 220 – 240°C

Weight: 750 g material (+ 250 g spool)

ABS Extrafill “Sky Blue”

40.00 лв. excl. VAT

ABS Extrafill “Sky Blue”

ABS is the perfect material for the production of prototypes and one of the most universal materials used in 3D printing;

“Fillamentum” guarantees material consumption with accuracy of +/- 0.05 mm

Filament diameter 1.75 mm / 2.85 mm

Operational temperature: 220 – 240°C

Weight: 750 g material (+ 250 g spool)

ABS Extrafill “Traffic Black”

40.00 лв. excl. VAT

ABS Extrafill “Traffic Black”

ABS is the perfect material for the production of prototypes and one of the most universal materials used in 3D printing;

“Fillamentum” guarantees material consumption with accuracy of +/- 0.05 mm

Filament diameter 1.75 mm / 2.85 mm

Operational temperature: 220 – 240°C

Weight: 750 g material (+ 250 g spool)

ABS Extrafill “Traffic Purple”

40.00 лв. excl. VAT

ABS Extrafill “Traffic Purple”

ABS is the perfect material for the production of prototypes and one of the most universal materials used in 3D printing;

“Fillamentum” guarantees material consumption with accuracy of +/- 0.05 mm

Filament diameter 1.75 mm / 2.85 mm

Operational temperature: 220 – 240°C

Weight: 750 g material (+ 250 g spool)

ABS Extrafill “Traffic Red”

40.00 лв. excl. VAT

ABS Extrafill “Traffic Red”

ABS is the perfect material for the production of prototypes and one of the most universal materials used in 3D printing;

“Fillamentum” guarantees material consumption with accuracy of +/- 0.05 mm

Filament diameter 1.75 mm / 2.85 mm

Operational temperature: 220 – 240°C

Weight: 750 g material (+ 250 g spool)

ABS Extrafill “Traffic White”

40.00 лв. excl. VAT

ABS Extrafill “Traffic White”

ABS is the perfect material for the production of prototypes and one of the most universal materials used in 3D printing;

“Fillamentum” guarantees material consumption with accuracy of +/- 0.05 mm

Filament diameter 1.75 mm / 2.85 mm

Operational temperature: 220 – 240°C

Weight: 750 g material (+ 250 g spool)

ABS Extrafill “Traffic Yellow”

40.00 лв. excl. VAT

ABS Extrafill “Traffic Yellow”

ABS is the perfect material for the production of prototypes and one of the most universal materials used in 3D printing;

“Fillamentum” guarantees material consumption with accuracy of +/- 0.05 mm

Filament diameter 1.75 mm / 2.85 mm

Operational temperature: 220 – 240°C

Weight: 750 g material (+ 250 g spool)

ABS Extrafill “Transparent”

40.00 лв. excl. VAT

ABS Extrafill “Transparent”

ABS is the perfect material for the production of prototypes and one of the most universal materials used in 3D printing;

“Fillamentum” guarantees material consumption with accuracy of +/- 0.05 mm

Filament diameter 1.75 mm / 2.85 mm

Operational temperature: 220 – 240°C

Weight: 750 g material (+ 250 g spool)

ABS Extrafill “Turquoise Blue”

40.00 лв. excl. VAT

ABS Extrafill “Turquoise Blue”

ABS is an ideal material for prototype production and is one of the most versatile materials in 3D printing;

“Fillamentum” guarantees a high material accuracy of +/- 0.05 mm

Fiber Diameter 1.75 mm / 2.85 mm

Operating temperature: 220 – 240 ° C

Weight: 750 g material (+ 250 g roll)

ABS Extrafill “Turquoise Green”

40.00 лв. excl. VAT

ABS Extrafill “Turquoise Green”

ABS is the perfect material for the production of prototypes and one of the most universal materials used in 3D printing;

“Fillamentum” guarantees material consumption with accuracy of +/- 0.05 mm

Filament diameter 1.75 mm / 2.85 mm

Operational temperature: 220 – 240°C

Weight: 750 g material (+ 250 g spool)

ASA

48.00 лв. excl. VAT

ASA

Thanks to its mechanical properties, the ASA material is perfect for the production of primary models and prototypes before serial production, and also for models with external application.

BRONZEFILL

98.00 лв. excl. VAT

BRONZEFILL

  • 3D printing with metals at your own home!
  • With this unique material you can print real bronze images which look laser sintered and have a matte finish;
  • 75 mm – weighing 0.50 kg

CAEMENTUM

57.00 лв. excl. VAT

CAEMENTUM

Caementum – for concrete foundations!

  • Designed specifically: for architecture, design, and archaeology
  • Printed objects resemble concrete;
  • Polish with sandpaper and water;
  • Extruder temperature: 230° +/-10° C
  • Bed temperature: 100° +/-10° C
  • Print speed: 60-70 mm/sec
  • Spool: 0.75 kg

CLAY

57.00 лв. excl. VAT

CLAY

Clay – Warm and earthy

  • Contains stone powder;
  • Designed specifically for: architecture, design, and archaeology
  • Polish with sandpaper and water
  • Extruder temperature: 230° +/-10° C
  • Bed temperature: 100° +/-10° C
  • Print speed: 60-70 mm/sec
  • Spool: 0.75 kg

CLAY EVOLUTION

69.00 лв. excl. VAT

CLAY EVOLUTION

  • Designed specifically for: architecture, design, and archaeology
  • Contains natural clay
  • Suitable for external use
  • Very hard polymer, UV resistant, and with less distortion
  • Printing without the need for support
  • Extruder temperature: 240° +/-10° C
  • Bed temperature: 100° +/-10° C
  • Print speed: 60-70 mm/sec
  • Spool: 0.5 kg

CPE HG100 “Army Green” (coming soon)

65.00 лв. excl. VAT

Fillamentum CPE (co-polyester) is a high-technical material for the FFF (also known as FDM) 3D printing technology.

Engineered for quality and easy printing with features that will dwarf all PET based materials.

Made from modified PETG material. Additional monomer improves all the properties when compared with PETG filaments.


Guarantee of high quality of printed object with good functional properties

Durable, tough, long life of the material

Excellent impact resistance (no break)

Good interlayer adhesion, easy printing as PLA, no odour, low warping

Great tensile and flexural strength, high hardness

High heat resistance

Possibility of priming & painting

Safe for food contact applications (declaration sent per request)

100% recyclable, bio-based, BPA free

Great chemical resistance

CPE HG100 “Black Soul”

65.00 лв. excl. VAT

CPE HG100 “Black Soul”

  • CPE (co-polyester) is a high-tech material for the  FDM printing technology!
  • Designed for high quality easy printing with functions exceeding those of the PET-based materials used so far.
  • Supplied in a spool, with filament size of 1.75 mm

CPE HG100 “Caramel Brown Metallic” (coming soon)

65.00 лв. excl. VAT

Fillamentum CPE (co-polyester) is a high-technical material for the FFF (also known as FDM) 3D printing technology.

Engineered for quality and easy printing with features that will dwarf all PET based materials.

Made from modified PETG material. Additional monomer improves all the properties when compared with PETG filaments.


Guarantee of high quality of printed object with good functional properties

Durable, tough, long life of the material

Excellent impact resistance (no break)

Good interlayer adhesion, easy printing as PLA, no odour, low warping

Great tensile and flexural strength, high hardness

High heat resistance

Possibility of priming & painting

Safe for food contact applications (declaration sent per request)

100% recyclable, bio-based, BPA free

Great chemical resistance

CPE HG100 “Deep Sea Transparent”

65.00 лв. excl. VAT

CPE HG100 “Deep Sea Transparent”

  • CPE (co-polyester) is a high-tech material for the  FDM printing technology!
  • Designed for high quality easy printing with functions exceeding those of the PET-based materials used so far.
  • Supplied in a spool, with filament size of 1.75 mm

CPE HG100 “Flash Yellow Metallic” (coming soon)

65.00 лв. excl. VAT

Fillamentum CPE (co-polyester) is a high-technical material for the FFF (also known as FDM) 3D printing technology.

Engineered for quality and easy printing with features that will dwarf all PET based materials.

Made from modified PETG material. Additional monomer improves all the properties when compared with PETG filaments.


Guarantee of high quality of printed object with good functional properties

Durable, tough, long life of the material

Excellent impact resistance (no break)

Good interlayer adhesion, easy printing as PLA, no odour, low warping

Great tensile and flexural strength, high hardness

High heat resistance

Possibility of priming & painting

Safe for food contact applications (declaration sent per request)

100% recyclable, bio-based, BPA free

Great chemical resistance

CPE HG100 “Flash Yellow Metallic” is UV reactive

CPE HG100 “Flirty Plum” (coming soon)

65.00 лв. excl. VAT

Fillamentum CPE (co-polyester) is a high-technical material for the FFF (also known as FDM) 3D printing technology.

Engineered for quality and easy printing with features that will dwarf all PET based materials.

Made from modified PETG material. Additional monomer improves all the properties when compared with PETG filaments.


Guarantee of high quality of printed object with good functional properties

Durable, tough, long life of the material

Excellent impact resistance (no break)

Good interlayer adhesion, easy printing as PLA, no odour, low warping

Great tensile and flexural strength, high hardness

High heat resistance

Possibility of priming & painting

Safe for food contact applications (declaration sent per request)

100% recyclable, bio-based, BPA free

Great chemical resistance

CPE HG100 “Grey Mouse Transparent” (coming soon)

65.00 лв. excl. VAT

Fillamentum CPE (co-polyester) is a high-technical material for the FFF (also known as FDM) 3D printing technology.

Engineered for quality and easy printing with features that will dwarf all PET based materials.

Made from modified PETG material. Additional monomer improves all the properties when compared with PETG filaments.


Guarantee of high quality of printed object with good functional properties

Durable, tough, long life of the material

Excellent impact resistance (no break)

Good interlayer adhesion, easy printing as PLA, no odour, low warping

Great tensile and flexural strength, high hardness

High heat resistance

Possibility of priming & painting

Safe for food contact applications (declaration sent per request)

100% recyclable, bio-based, BPA free

Great chemical resistance

CPE HG100 “Jungle Green Metallic” (coming soon)

65.00 лв. excl. VAT

Fillamentum CPE (co-polyester) is a high-technical material for the FFF (also known as FDM) 3D printing technology.

Engineered for quality and easy printing with features that will dwarf all PET based materials.

Made from modified PETG material. Additional monomer improves all the properties when compared with PETG filaments.


Guarantee of high quality of printed object with good functional properties

Durable, tough, long life of the material

Excellent impact resistance (no break)

Good interlayer adhesion, easy printing as PLA, no odour, low warping

Great tensile and flexural strength, high hardness

High heat resistance

Possibility of priming & painting

Safe for food contact applications (declaration sent per request)

100% recyclable, bio-based, BPA free

Great chemical resistance

CPE HG100 “Lagoon Transparent” (coming soon)

65.00 лв. excl. VAT

Fillamentum CPE (co-polyester) is a high-technical material for the FFF (also known as FDM) 3D printing technology.

Engineered for quality and easy printing with features that will dwarf all PET based materials.

Made from modified PETG material. Additional monomer improves all the properties when compared with PETG filaments.


Guarantee of high quality of printed object with good functional properties

Durable, tough, long life of the material

Excellent impact resistance (no break)

Good interlayer adhesion, easy printing as PLA, no odour, low warping

Great tensile and flexural strength, high hardness

High heat resistance

Possibility of priming & painting

Safe for food contact applications (declaration sent per request)

100% recyclable, bio-based, BPA free

Great chemical resistance

CPE HG100 “Lemonade Transparent” (coming soon)

65.00 лв. excl. VAT

Fillamentum CPE (co-polyester) is a high-technical material for the FFF (also known as FDM) 3D printing technology.

Engineered for quality and easy printing with features that will dwarf all PET based materials.

Made from modified PETG material. Additional monomer improves all the properties when compared with PETG filaments.


Guarantee of high quality of printed object with good functional properties

Durable, tough, long life of the material

Excellent impact resistance (no break)

Good interlayer adhesion, easy printing as PLA, no odour, low warping

Great tensile and flexural strength, high hardness

High heat resistance

Possibility of priming & painting

Safe for food contact applications (declaration sent per request)

100% recyclable, bio-based, BPA free

Great chemical resistance

CPE HG100 “Mistake Blue Metallic” (coming soon)

65.00 лв. excl. VAT

Fillamentum CPE (co-polyester) is a high-technical material for the FFF (also known as FDM) 3D printing technology.

Engineered for quality and easy printing with features that will dwarf all PET based materials.

Made from modified PETG material. Additional monomer improves all the properties when compared with PETG filaments.


Guarantee of high quality of printed object with good functional properties

Durable, tough, long life of the material

Excellent impact resistance (no break)

Good interlayer adhesion, easy printing as PLA, no odour, low warping

Great tensile and flexural strength, high hardness

High heat resistance

Possibility of priming & painting

Safe for food contact applications (declaration sent per request)

100% recyclable, bio-based, BPA free

Great chemical resistance

CPE HG100 “Natural”

60.00 лв. excl. VAT

CPE HG100 “Natural”

  • CPE (co-polyester) is a high-tech material for the  FDM printing technology!
  • Designed for high quality easy printing with functions exceeding those of the PET-based materials used so far.
  • Supplied in a spool, with filament size of 1.75 mm

CPE HG100 “Pistachio Green”(coming soon)

65.00 лв. excl. VAT

Fillamentum CPE (co-polyester) is a high-technical material for the FFF (also known as FDM) 3D printing technology.

Engineered for quality and easy printing with features that will dwarf all PET based materials.

Made from modified PETG material. Additional monomer improves all the properties when compared with PETG filaments.


Guarantee of high quality of printed object with good functional properties

Durable, tough, long life of the material

Excellent impact resistance (no break)

Good interlayer adhesion, easy printing as PLA, no odour, low warping

Great tensile and flexural strength, high hardness

High heat resistance

Possibility of priming & painting

Safe for food contact applications (declaration sent per request)

100% recyclable, bio-based, BPA free

Great chemical resistance

CPE HG100 “UFO Blue Metallic” (coming soon)

65.00 лв. excl. VAT

Fillamentum CPE (co-polyester) is a high-technical material for the FFF (also known as FDM) 3D printing technology.

Engineered for quality and easy printing with features that will dwarf all PET based materials.

Made from modified PETG material. Additional monomer improves all the properties when compared with PETG filaments.


Guarantee of high quality of printed object with good functional properties

Durable, tough, long life of the material

Excellent impact resistance (no break)

Good interlayer adhesion, easy printing as PLA, no odour, low warping

Great tensile and flexural strength, high hardness

High heat resistance

Possibility of priming & painting

Safe for food contact applications (declaration sent per request)

100% recyclable, bio-based, BPA free

Great chemical resistance

CPE HG100 “Vertigo Grey” (coming soon)

65.00 лв. excl. VAT

Fillamentum CPE (co-polyester) is a high-technical material for the FFF (also known as FDM) 3D printing technology.

Engineered for quality and easy printing with features that will dwarf all PET based materials.

Made from modified PETG material. Additional monomer improves all the properties when compared with PETG filaments.


Guarantee of high quality of printed object with good functional properties

Durable, tough, long life of the material

Excellent impact resistance (no break)

Good interlayer adhesion, easy printing as PLA, no odour, low warping

Great tensile and flexural strength, high hardness

High heat resistance

Possibility of priming & painting

Safe for food contact applications (declaration sent per request)

100% recyclable, bio-based, BPA free

Great chemical resistance

DARK STONE

57.00 лв. excl. VAT

DARK STONE

  • Contains stone powder
  • Designed specifically for: architecture, design, and archaeology
  • Polish with sandpaper and water
  • Extruder temperature: 230° +/-10° C
  • Bed temperature: 100° +/-10° C
  • Print speed: 60-70 mm/sec
  • Spool: 0.75 kg

Ecogenius PLA

45.00 лв. excl. VAT

Ecogenius PLA / WONDERFIL  

Genius Ecologic 3D Printing Filament!

  • Plant based design;
  • Organic;
  • Fully recyclable;
  • Natural glossy finish;
  • Extruder temperature: 195° +/-10° C
  • Bed temperature: up to 80° C
  • Print speed: 60-80 mm/sec
  • Spool: 1 kg

 

Elasto A

98.00 лв. excl. VAT

Elasto A

  • Elasto А is a flexible elastomer material, with hardness of 92 according to the Shore А Scale
  • Reliable in time and resilient to aggressive skin fats
  • Excellent elasticity and high abrasion resistance
  • Suitable for elastic connectors
  • Colour: Orange
  • Extruder temperature: 220-0+10° C
  • Bed temperature: 50° C
  • Print speed: 30-50 mm/1°
  • Spool: 500 g

FLEXABILITY TPE-HP

69.00 лв. excl. VAT

FLEXABILITY TPE-HP

  • Exceptionally technical flexible material;
  • Very high resistance to abrasion and scratches;
  • High wear resistance;
  • Very high thermal resistance;
  • Extruder temperature: 240° +/-10° C
  • Bed temperature: 95° +/-10° C
  • Print speed: 30-40 mm/sec
  • Spool: 0.5 kg

Flexfill 92A “Traffic Black”

55.00 лв. excl. VAT

Flexfill 92A “Traffic Black”

  • Do you want your 3D models to stand out with their elasticity and flexibility?
  • It is time to try Flexfill;
  • Flexfill is an oil-resistant material with unique mechanical properties and excellent adhesion between the layers.
  • If you have a printer with two printheads, you can use Flexfill to add another layer which will make the surface of the objects soft to the touch.

Flexfill 98A “Traffic Black”

55.00 лв. excl. VAT

Flexfill 98A “Traffic Black”

  • Do you want your 3D models to stand out with their elasticity and flexibility?
  • It is time to try Flexfill;
  • Flexfill is an oil-resistant material with unique mechanical properties and excellent adhesion between the layers.
  • If you have a printer with two printheads, you can use Flexfill to add another layer which will make the surface of the objects soft to the touch

Flexfill 98A Natural

55.00 лв. excl. VAT

Would you like your 3D models to stand out by their elasticity and flexibility but you could not find a suitable elastic material that would fulfill your idea? We have a solution – try printing flexible parts with Flexfill 3D printing filament by Fillamentum. And if you have a printer with two print heads you can use Flexfill to add an extra layer which will make a surface soft to touch.

  • Semi-flexible filament with hardness 98 ShA
  • Technical Data Sheet
  • Safety Data Sheet
  • RoHS Data Sheet
  • The length of Flexfill filaments (1.75 mm, 750 g) is 175 m
  • The length of Flexfill filaments (2.85 mm, 750 g) is 70 m

Flexible

78.00 лв. excl. VAT

Flexible

  • Would you like to print an object with better flexibility?
  • The Flexible material is the right choice for you!
  • In order to print this flexible material with good results you must reduce the print speed to 10-40 mm/sec;
  • Give it a try and see how easy it is to print with Flexible!
  • It is supplied in two colours: white and black
  • 1.75 mm – Weight: 0.50 kg

FLEXMARK TPU 7-8-9

57.00 лв. excl. VAT

FLEXMARK TPU 7-8-9

  • FLEXMARK 7 is the most flexible but it requires excellent calibration of the printer;
  • FLEXMARK 8 is a good combination of flexibility and  stiffness, a material which is easier to use in printing;
  • FLEXMARK 9 is the hardest of all Flexs and allows you to print as usual;
  • Extruder temperature: 225° +/-10° C
  • Bed temperature: до 45° C
  • Print speed: 10-20 / 20-30 / 25-35 mm/sec.
  • Spool: 0.5 kg

FORTIS LL

117.00 лв. excl. VAT

FORTIS LL

  • Fortis LL is made on a polyolefin matrix and combines elasticity, good elastic memory,  wear and tear resistance.
  • Exceptionally lightweight material
  • For corrective braces or flexible splinting of the soft tissues of limbs
  • Colour: white
  • Extruder temperature: 250-0+15° C
  • Bed temperature: 90° C
  • Print speed: 40-60 mm/1°
  • Spool: 750 g

Fusion – Universal PLA

45.00 лв. excl. VAT

Fusion – Universal PLA / WONDERFIL  

FUSION – UNIVERSAL PLA

  • Specially designed for long printing;
  • The special formula prevents nozzle clogging;
  • Odourless with low distortion levels;
  • Extruder temperature: 190° +/-10° C
  • Bed temperature: up to 70° C
  • Print speed: 60-80 mm/sec
  • Spool: 0.75 kg

 

Gonzales – High Speed PLA

45.00 лв. excl. VAT

Gonzales – High Speed PLA / WONDERFIL

Gonzales – High Speed PLA

Specially designed for high-speed 3D printing with optimal accuracy!

Odourless, fully biodegradable, ecological!

No distortions even without heating!

Extruder temperature: 200° +/-10° C

Bed temperature: up to 80° C

Print speed: up to 200 mm/sec

Spool: 1 kg

HERITAGE BRICK

57.00 лв. excl. VAT

HERITAGE BRICK

Heritage Brick – Print them on – Build it up

  • Designed specifically for: architecture, design, and archaeology
  • Polish with sandpaper and water
  • Extruder temperature: 230° +/-10° C
  • Bed temperature: 100° +/-10° C
  • Print speed: 60-70 mm/sec
  • Spool: 0.75 kg

Kyotoflex PLA

57.00 лв. excl. VAT

 Kyotoflex / WONDERFIL  

Kyotoflex BIOFLEXIBLE, from plants to plants!

Kyoto Flex is a flexible polymer;

Kyotoflex is fully biodegradable;

Extruder temperature: 200° +/-10° C

Bed temperature: up to 40° C

Print speed: 40-50 mm/sec

Spool: 0.5 kg

MONUMENTAL

57.00 лв. excl. VAT

MONUMENTAL

  • Designed specifically for: architecture, design, and archaeology
  • Contains marble powder
  • Printed objects have a marble effect
  • Polish with sandpaper and water
  • Extruder temperature: 230° +/-10° C
  • Bed temperature: 100° +/-10° C
  • Print speed: 60-70 mm/sec
  • Spool: 0.75 kg

MONUMENTAL EVOLUTION

69.00 лв. excl. VAT

MONUMENTAL EVOLUTION

  • Designed specifically for: architecture, design, and archaeology
  • Contains marble powder
  • Printed objects have a marble effect
  • Suitable for outdoor use
  • High hardness polymer, UV stable, with less distortion
  • Printing does not require support
  • Extruder temperature: 240° +/-10°C
  • Bed temperature: 100° +/-10° C
  • Print speed: 60-70 mm/sec
  • Spool: 0.5 kg

Nylon AF80

Nylon AF80

Fillamentum Nylon AF80 is a Nylon based aramid fibres reinforced material for the FFF (also known as FDM) 3D printing technology.

Its main advantages are not only high strength and high thermal or chemical resistance, but also better processing stability and rheological properties. Typical is also low thermal expansion. This material is suitable for printing of frequently stressed parts (for example bearings etc.) and thanks to aramid fibres can be used as replacement of metals.

 

  • High material consumption accuracy +/- 0.1 mm
  • Operating temperature: 220 – 230 °C
  • Weight: 750 g material (+ 250 g spool)

Nylon CF15

102.00 лв. excl. VAT

Nylon CF15

The main advantages of this material are its strength and high thermal resistance reinforced with carbon fibres

  • High accuracy of consumption +/- 0.1 mm
  • Fibre diameter: 1.75 or 2.85
  • Operating temperature: 235 – 260 °C
  • Weight: 600 g material (+ 250 g spool)
  • Note: Nylon CF15 has abrasive properties and it is recommended that it should be printed with a hardened or steel nozzle.

Nylon FX256 “Natural”

102.00 лв. excl. VAT

Nylon FX256 “Natural”

The main advantages of this material are its high durability and flexibility

Its low coefficient of friction and high melting temperature make it an excellent choice for printing functional and technical elements.

  • High accuracy of material consumption +/- 0,1 mm
  • Fibre diameter: 1.75 or 2.85
  • Operating temperature: 235 – 250 °C
  • Weight: 750 g material (+ 250 g spool)

P-LENE (PolyPropylene)

68.10 лв. excl. VAT

P-LENE

  • PolyPropylene retains up to 95% of the characteristics of the objects
  • Very high mechanical strength and durability, wear resistance, chemical resistance
  • Designed specifically for: 3D printing: easy to use, odourless
  • Extruder temperature: 245° +/-10° C
  • Bed temperature: up to 100° C / always on a LENEPLATE bed
  • Print speed: 60-80 mm/sec
  • Spool: 0.75 kg

PET black

58.00 лв. excl. VAT

PET black

  • PET (also known as polyethylene  terephthalate) in its original state is a colourless and crystal clear material.
  • PET is a very hard and very lightweight materials which is highly resistant to impact. Spool with fibre diameter of 1.75 mm
  • Weight: 750 g

PET blue

58.00 лв. excl. VAT

PET blue

  • PET (also known as polyethylene  terephthalate) in its original state is a colourless and crystal clear material.
  • PET is a very hard and very lightweight materials which is highly resistant to impact. Spool with fibre diameter of 1.75 mm
  • Weight: 750 g

PET red

58.00 лв. excl. VAT

PET red

  • PET (also known as polyethylene  terephthalate) in its original state is a colourless and crystal clear material.
  • PET is a very hard and very lightweight materials which is highly resistant to impact. Spool with fibre diameter of 1.75 mm
  • Weight: 750 g

PET white

58.00 лв. excl. VAT

PET white

  • PET (also known as polyethylene  terephthalate) in its original state is a colourless and crystal clear material.
  • PET is a very hard and very lightweight materials which is highly resistant to impact. Spool with fibre diameter of 1.75 mm
  • Weight: 750 g

PLA black

47.00 лв. excl. VAT

PLA black

PLA is the most universal 3D printing material;

The greatest advantage of the material is its capacity to bend without changing its structure;

Spool with fibre diameter of 1.75 mm

Print temperature: 200-210°C

Weight: 1.4 kg

PLA blue

47.00 лв. excl. VAT

PLA blue

PLA is the most universal 3D printing material;

The greatest advantage of the material is its capacity to bend without changing its structure;

Spool with fibre diameter of 1.75 mm

Print temperature: 200-210°C

Weight: 1.4 kg

PLA Crystal Clear

50.00 лв. excl. VAT

PLA Crystal Clear

PLA is the most universal 3D printing material

“Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems.

PLA Crystal Clear “Iceland Blue”

50.00 лв. excl. VAT

PLA Crystal Clear “Iceland Blue”

PLA is the most universal 3D printing material

“Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems.

PLA Crystal Clear “Smaragd Green”

50.00 лв. excl. VAT

PLA Crystal Clear “Smaragd Green”

PLA is the most universal 3D printing material

“Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 210 – 230°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems.

PLA darl blue

47.00 лв. excl. VAT

PLA darl blue

PLA is the most universal 3D printing material;

The greatest advantage of the material is its capacity to bend without changing its structure;

Spool with fibre diameter of 1.75 mm

Print temperature: 200-210°C

Weight: 1.4 kg

PLA Extrafill “Chocolate Brown”

40.00 лв. excl. VAT

PLA Extrafill “Chocolate Brown”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Cobalt Blue”

40.00 лв. excl. VAT

PLA Extrafill “Cobalt Blue”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Concrete Grey”

40.00 лв. excl. VAT

PLA Extrafill “Concrete Grey”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Everybody’s Magenta”

50.00 лв. excl. VAT

PLA Extrafill “Everybody’s Magenta”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Gold Happens”

50.00 лв. excl. VAT

PLA Extrafill “Gold Happens”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Green Blue”

40.00 лв. excl. VAT

PLA Extrafill “Green Blue”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Green Grass”

40.00 лв. excl. VAT

PLA Extrafill “Green Grass”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Light Ivory”

40.00 лв. excl. VAT

PLA Extrafill “Light Ivory”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Lilac”

40.00 лв. excl. VAT

PLA Extrafill “Lilac”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Luminous Green”

40.00 лв. excl. VAT

PLA Extrafill “Luminous Green”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Luminous Orange”

40.00 лв. excl. VAT

PLA Extrafill “Luminous Orange”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Luminous Red”

40.00 лв. excl. VAT

PLA Extrafill “Luminous Red”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Luminous Yellow”

40.00 лв. excl. VAT

PLA Extrafill “Luminous Yellow”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Melon Yellow”

40.00 лв. excl. VAT

PLA Extrafill “Melon Yellow”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Metallic Grey”

40.00 лв. excl. VAT

PLA Extrafill “Metallic Grey”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Natural”

35.00 лв. excl. VAT

PLA Extrafill “Natural”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Noble Blue”

50.00 лв. excl. VAT

PLA Extrafill “Noble Blue”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Orange Orange”

40.00 лв. excl. VAT

PLA Extrafill “Orange Orange”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Pearl Green”

50.00 лв. excl. VAT

PLA Extrafill “Pearl Green”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Pearl Night Blue”

50.00 лв. excl. VAT

PLA Extrafill “Pearl Night Blue”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Pearl Ruby Red”

50.00 лв. excl. VAT

PLA Extrafill “Pearl Ruby Red”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Pearl Ruby Red”

50.00 лв. excl. VAT

PLA Extrafill “Pearl Ruby Red”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Pearl Violet”

50.00 лв. excl. VAT

PLA Extrafill “Pearl Violet”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Purple Red”

40.00 лв. excl. VAT

PLA Extrafill “Purple Red”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Rapunzel Silver”

50.00 лв. excl. VAT

PLA Extrafill “Rapunzel Silver”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Signal Brown”

40.00 лв. excl. VAT

PLA Extrafill “Signal Brown”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Signal Red”

40.00 лв. excl. VAT

PLA Extrafill “Signal Red”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Signal Yellow”

40.00 лв. excl. VAT

PLA Extrafill “Signal Yellow”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Sky Blue”

40.00 лв. excl. VAT

PLA Extrafill “Sky Blue”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Traffic Black”

40.00 лв. excl. VAT

PLA Extrafill “Traffic Black”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Traffic Purple”

40.00 лв. excl. VAT

PLA Extrafill “Traffic Purple

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Traffic Red”

40.00 лв. excl. VAT

PLA Extrafill “Traffic Red”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Traffic White”

40.00 лв. excl. VAT

PLA Extrafill “Traffic White”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Traffic Yellow”

40.00 лв. excl. VAT

PLA Extrafill “Traffic Yellow”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Turquoise Blue”

40.00 лв. excl. VAT

PLA Extrafill “Turquoise Blue”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Turquoise Green”

40.00 лв. excl. VAT

PLA Extrafill “Turquoise Green”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Vertigo Galaxy”

50.00 лв. excl. VAT

PLA Extrafill “Vertigo Galaxy”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Vertigo Grey”

50.00 лв. excl. VAT

PLA Extrafill “Vertigo Grey”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA Extrafill “Vertigo Starlight”

50.00 лв. excl. VAT

PLA Extrafill “Vertigo Starlight”

PLA is the most universal 3D printing material;

“ Fillamentum” guarantee a high level of material consumption accuracy +/- 0.05 mm

Fibre diameter 1.75 mm / 2.85 mm

Operating temperature: 190 – 210°C

Weight: 750 g material (+ 250 g spool)

“Fillamentum” supply PLA in a wide range of colours corresponding to the RAL and Pantone colour systems

PLA gold

47.00 лв. excl. VAT

PLA gold

PLA is the most universal 3D printing material;

The greatest advantage of the material is its capacity to bend without changing its structure;

Spool with fibre diameter of 1.75 mm

Print temperature: 200-210°C

Weight: 1.4 kg

PLA green

47.00 лв. excl. VAT

 PLA green

PLA is the most universal 3D printing material;

The greatest advantage of the material is its capacity to bend without changing its structure;

Spool with fibre diameter of 1.75 mm

Print temperature: 200-210°C

Weight: 1.4 kg

PLA grey

47.00 лв. excl. VAT

PLA grey

PLA is the most universal 3D printing material;

The greatest advantage of the material is its capacity to bend without changing its structure;

Spool with fibre diameter of 1.75 mm

Print temperature: 200-210°C

Weight: 1.4 kg

PLA light blue

47.00 лв. excl. VAT

PLA light blue

PLA is the most universal 3D printing material;

The greatest advantage of the material is its capacity to bend without changing its structure;

Spool with fibre diameter of 1.75 mm

Print temperature: 200-210°C

Weight: 1.4 kg

PLA light green

47.00 лв. excl. VAT

PLA light green

PLA is the most universal 3D printing material;

The greatest advantage of the material is its capacity to bend without changing its structure;

Spool with fibre diameter of 1.75 mm

Print temperature: 200-210°C

Weight: 1.4 kg

PLA orange

47.00 лв. excl. VAT

PLA orange

PLA is the most universal 3D printing material;

The greatest advantage of the material is its capacity to bend without changing its structure;

Spool with fibre diameter of 1.75 mm

Print temperature: 200-210°C

Weight: 1.4 kg

PLA petroleum green

47.00 лв. excl. VAT

PLA petroleum green

PLA is the most universal 3D printing material;

The greatest advantage of the material is its capacity to bend without changing its structure;

Spool with fibre diameter of 1.75 mm

Print temperature: 200-210°C

Weight: 1.4 kg

PLA red

47.00 лв. excl. VAT

PLA red

PLA is the most universal 3D printing material;

The greatest advantage of the material is its capacity to bend without changing its structure;

Spool with fibre diameter of 1.75 mm

Print temperature: 200-210°C

Weight: 1.4 kg

PLA silver

47.00 лв. excl. VAT

PLA silver

PLA is the most universal 3D printing material;

The greatest advantage of the material is its capacity to bend without changing its structure;

Spool with fibre diameter of 1.75 mm

Print temperature: 200-210°C

Weight: 1.4 kg

PLA transparent

47.00 лв. excl. VAT

PLA transparent

PLA is the most universal 3D printing material;

The greatest advantage of the material is its capacity to bend without changing its structure;

Spool with fibre diameter of 1.75 mm

Print temperature: 200-210°C

Weight: 1.4 kg

PLA white

47.00 лв. excl. VAT

PLA white

 

PLA is the most universal 3D printing material;

The greatest advantage of the material is its capacity to bend without changing its structure;

Spool with fibre diameter of 1.75 mm

Print temperature: 200-210°C

Weight: 1.4 kg

PLA yellow

47.00 лв. excl. VAT

PLA yellow

 

PLA is the most universal 3D printing material;

The greatest advantage of the material is its capacity to bend without changing its structure;

Spool with fibre diameter of 1.75 mm

Print temperature: 200-210°C

Weight: 1.4 kg

PRO1 – black

350.00 лв. excl. VAT

PRO1 – black

Reduced printing time by 30%

High performance

Improved mechanical properties compared to ABS

Flexibility

Print temperature: 210/220 degrees

Heating: 60 degrees

Pro1 (4.5 kg) is the perfect choice for “Builder Extreme”.

Pro1 may print faster than the ordinary PLA, it does not get deformed and does not shrink.

Weight: 4.5 kg

PRO1 – silver

350.00 лв. excl. VAT

PRO1 – silver

Reduced printing time by 30%

High performance

Improved mechanical properties compared to ABS

Flexibility

Print temperature: 210/220 degrees

Heating: 60 degrees

Pro1 (4.5 kg) is the perfect choice for “Builder Extreme”.

Pro1 may print faster than the ordinary PLA, it does not get deformed and does not shrink.

Weight: 4.5 kg

PRO1 – white

350.00 лв. excl. VAT

PRO1 – white

Reduced printing time by 30%

High performance

Improved mechanical properties compared to ABS

Flexibility

Print temperature: 210/220 degrees

Heating: 60 degrees

Pro1 (4.5 kg) is the perfect choice for “Builder Extreme”.

Pro1 may print faster than the ordinary PLA, it does not get deformed and does not shrink.

Weight: 4.5 kg

Pure FT

98.00 лв. excl. VAT

Pure FT

  • Flexible material with a 93 score on the Shore A scale
  • Enriched with antimicrobial material of a new generation with 99.9% effectiveness
  • Laboratory tested in compliance with the international standards
  • Suitable for production of orthopaedic insoles
  • Colour: orange
  • Extruder temperature: 225 -5+10° C
  • Bed temperature: 55° C
  • Print speed: 35-50 mm/1°
  • Spool: 500 g

PVA

117.00 лв. excl. VAT

PVA

  • PVA is used as an auxiliary printing material.
  • Water soluble for easier removal.
  • 1,75mm, Weight: 0.5 kg.

SANDY

57.00 лв. excl. VAT

SANDY

As smooth as sand – as durable as the pyramids

  • Designed specifically for: architecture, design, and archaeology
  • Printed objects resemble sand
  • Polish with sandpaper and water
  • Extruder temperature: 230° +/-10° C
  • Bed temperature: 100° +/-10° C
  • Print speed: 60-70 mm/sec
  • Spool: 0.75 kg

Shogun Superior PLA

57.00 лв. excl. VAT

Shogun Superior PLA / WONDERFIL  

SHOGUN HEAT RESISTANT PLA

  • SHOGUN HEAT RESISTANT PLA
  • Endures temperatures up to 90°C, without getting deformed;
  • Up to 20% better shock resistance than the standard PLA;
  • Biodegradable polymer, according to EN13432;
  • The bed does not need to be heated;
  • Extruder temperature: 195° +/-10° C
  • Bed temperature: up to 90°C
  • Print speed: 60-70 mm/sec
  • Spool: 1 kg

STRUCTURA MA

196.00 лв. excl. VAT

STRUCTURA MA

  • Material based on polyamide and carbon fibres
  • Lightweight material with excellent mechanical characteristics
  • The carbon fibres make it flexible and suitable for the production of small details
  • Upper and lower limb prosthetics and exoskeleton elements
  • Colour: black
  • Extruder temperature: 235 -5+10° C
  • Bed temperature: 60-70° C
  • Print speed: 35-45 mm/1°
  • Spool: 1 kg

Timberfill “Light Wood Tone”

72.00 лв. excl. VAT

Timberfill “Light Wood Tone” / Woodfill

  • Fillamentum Timberfill is a material for: the FFF 3D printing technology (also known as FDM)
  • Diameter tolerance: +/- 0.1 mm
  • Operating temperature: 170 – 185 ° C
  • Minimum nozzle diameter: 0.4 mm
  • To achieve best printing quality, we recommend: nozzle with diameter 0.5 mm
  • Weight: 750 g fibre (+ 250 g spool)

Timberfill “Rosewood”

72.00 лв. excl. VAT

Timberfill “Rosewood” / Woodfill 

  • Fillamentum Timberfill is a material for: the FFF 3D printing technology (also known as FDM)
  • Diameter tolerance: +/- 0.1 mm
  • Operating temperature: 170 – 185°C
  • Minimum nozzle diameter: 0.4 mm
  • To achieve best printing quality, we recommend: nozzle with diameter 0.5 mm
  • Weight: 750 g fibre (+ 250 g spool)

ULTRAFLEXX TPE-E

57.00 лв. excl. VAT

ULTRAFLEXX TPE-E

  • For industrial purposes;
  • High resistance to deformation and oil treatment;
  • Remarkable elasticity – the object will restore its shape promptly;
  • Very easy to use even in extreme circumstances between -50 ° C and 120 ° C;
  • Extruder temperature: 225° +/-10° C
  • Bed temperature: 45-90° C
  • Print speed: 20-35 mm/sec
  • Spool: 0.5 kg

Verum T  

140.00 лв. excl. VAT

Verum T      

3D filament based on a polyester matrix

  • With Verum T you can print hard objects with high resistance
  • The objects may be sterilised in an autoclave at 125°С
  • Suitable for rigid immobilising braces
  • Colour: transparent
  • Extruder temperature: 265-0+10° C
  • Bed temperature: 100-0+10° C
  • Print speed: 35-45 mm/1°
  • Spool: 800 g

Vinyl 303 Black

80.00 лв. excl. VAT

Fillamentum Vinyl 303 (polyvinylchloride) is a high-technical material for the FFF (also known as FDM) 3D printing technology.

Vinyl 303 is commodity plastic ideal for prototyping:

  • Flame retardant resistance
  • Excellent chemical resistance – resistant to oils, salts, solutions, water
  • Functionality, toughness, rigidity
  • Great hardness and mechanical properties
  • High impact strength
  • Low moisture adsorption
  • Safe for use in electrical and electronic equipment
  • Recyclable, styrene free

Vinyl 303 Natural

80.00 лв. excl. VAT

Fillamentum Vinyl 303 (polyvinylchloride) is a high-technical material for the FFF (also known as FDM) 3D printing technology.

Vinyl 303 is commodity plastic ideal for prototyping:

  • Flame retardant resistance
  • Excellent chemical resistance – resistant to oils, salts, solutions, water
  • Functionality, toughness, rigidity
  • Great hardness and mechanical properties
  • High impact strength
  • Low moisture adsorption
  • Safe for use in electrical and electronic equipment
  • Recyclable, styrene free

WOODFILL

76.00 лв. excl. VAT

WOODFILL

  • 3D printing with a magnificent wood effect!
  • If you are looking for: something special, Woodfill is just the right material for you!
  • Composed of 70% PLA and 30% recycled wood fibers
  • Spool: 1.75 mm and weight: 0.75 KG