Description
BRONZEFILL
- Recommended printing temperature:195-220C*
- Recommended printing speed:40 – 100 mm/s
- Temperature of heated printing pad(if any): 50-60C
- Tip:
- A little grinding and polishing will make your Bronzefill printed objects shine;
- Start grinding with a 120-180 sized sandpaper and make sure that all print lines are well polished;
- Take care not to scrape off too much of the material and then move on to a 240-320 sized sandpaper, and then finish with size 600;
- To end the process, wipe off with a soft towel and use a little bit of furniture wax polish for more lustre;
- The weight of the material is special, about 3 times heavier than the standard PLA.
- Now you can print jewellery that does not look like cheap and lightweight plastic parts.
- A little grinding and polishing will make your Bronzefill printed objects shine;The weight of the material is special, about 3 times heavier than the standard PLA.
- Now you can print jewellery that does not look like cheap and lightweight plastic parts.
Reviews
There are no reviews yet.