PLA is the most universal print material useful even for printing big objects. The biggest advantage is itsunrecognisable tendency to twist; Rolls with fiber diameter of 1.75 mm Temperature of printing: 200-210 ° C Price: 22,90 Еuro
Fillamentum guarantees high precision of filament dimensions within the tolerance of +/- 0,05 mm, which is strictly controlled throughout the production. Fiber diameter 1.75 mm / 2,85 мм Working temperature: 220 - 240 °C Weight: 750 g of filament (+ 250 g spool)
PLA is the most universal print material; Fillamentum guarantees high precision of filament dimensions within the tolerance of +/- 0,05 mm; Fiber diameter 1.75 mm / 2,85 мм Working temperature:190 - 210 °C Weight:750 g of filament (+ 250 g spool) Printing filaments are produced in a wide varierty of colours in accordance with the colour charts RAL and...
Developed specifically for long timed-prints. Its special formulation avoids nozzle clogging. Fusion PLA is specific for 3d printing, with odourless composition and low warping. Extruder Temperature: 190° +/-10° C Bed Temperature: cold to 70° C Print speed: 60-80 mm/s Spool weight: 0,75 kg
The Builder Premium Small is one of the most sophisticated 3D printers available. With its fully closed housing it’s 2 times more silent than the original Builders. The 4.3 inch full color touch screen and Wi-Fi. Use the on-board camera and check the print and control the Builder on your mobile device. Price: 0000,00 Еuro
3DGence ONE - Fully automatic heatbed calibration; - PUSH – patented quick hotend exchange system. – FFF printing technology – build volume 235 L x 255 W x 195 H mm – quick removal of hotend system: „PUSH” – auto-calibration and auto-compensation - handling materials up to 500 degrees; – ceramic heatbed – 3DGenceSlicer – top-class components Made in Poland
Flexible material with hardness 93 according the shore A scale; The polymer composition was enriched with new generation antimicrobial material,boasting an 99,9% efficiency; Tested in laboratory according to international standards; For orthopedic insoles; Colour:orange; Extruder Temperature: 225 -5+10° C Bed Temperature: 55° C Print speed: 35-50 mm/1°...
Elasto A is an elastomeric, flexible material with hardness 92 according the shore A scale; Reliable over time and resistant to aggressive skin fats; It also offers excellent elasticity and high abrasion resistance; Ideal for elastic joint elements; Colour: orange Extruder Temperature: 220-0+10° C Bed Temperature: 50° C Print speed: 30-50 mm/1° Spool...
3D Filament based on a polyester matrix; Verum T offers the ability to produce rigid elements with high tenacity properties; The pieces can be sterilized in autoclave at 125° C; Suitable for rigid immobilisation; Colour: Seetrough; Extruder Temperature: 265-0+10° C Bed Temperature: 100-0+10° C Print speed: 35-45 mm/1° Spool weight: 800 gr
Polyamide carbon fiber composite; Lightweight properties with high mechanical strength; The carbon fibers makes it possible to produce structural supports with more advanced geometries; Ideal for: Upper and lower limb prosthetics, Structural support elements, Exoskeletal elements; Extruder Temperature: 235 -5+10° C Bed Temperature: 60-70° C Print speed:...
This filament on a polyolefin matrix allows the combination of relative elasticity, elastic memory, enervation resistance with high wear and laceration treshold. Еxceptional lightweight properties. Fortis is ideal for: busts, corrective corsets, upper leg tutors. Colour: white Extruder Temperature: 250-0+15° C Bed Temperature: 90° C Print speed: 40-60...
Caementum - essential and concrete Developed specifically for architecture, design and archeological fields; Printed objets have Concrete finish; Polish your objects with fine sandpaper and water; Extruder Temperature: 230° +/-10° C Bed Temperature: 100° +/-10° C Print speed: 60-70 mm/s Spool weight: 0,75 kg
Heritage Brick – Print them on – Build it up Developed specifically for architecture, design and archeological fields; Polish your objects with fine sandpaper and water; Extruder Temperature: 230° +/-10° C Bed Temperature: 100° +/-10° C Print speed: 60-70 mm/s Spool weight: 0,75 kg
Download here:: | Прочети за нас: |
| ![]() прочети статия |
| ![]() прочети статия |
Напоследък изглежда сякаш навсякъде се говори за 3д принтиране, но какво точно представлява то? Ето един бърз наръчник, обясняващ за какво е целият този шум.
Read MoreВижте как ние решихме да използваме Builder Premium
Read MoreНаправи си сам: топка за скоростен лост
Read More